Industrial Supplies
- Proto 7-Piece Super-Duty Drive Pin Punch Set (PTO48007)
- 1 piece design.
- Shock resistant tool steel.
- Hand ground cutting edge.
- Hardened, quenched, and tempered to precise specifications.
More Details - Greenlee Slug-Buster Knockout Kit, 1/2-1 1/4 (GRX7235BB)
- Assortment of commonly used knockout punches.
- High-impact plastic carrying case.
More Details - Starrett Drive Pin Punch, 8 (LST51181)
- Extra-long.
- Well proportioned, hardened, properly tempered, and have a knurled grip.
- For following long cotter pins and the like into holes with out hindrance.
More Details - Proto 5-Piece Long Drive Pin Punch Set (PTO48005L)
- Hardened, quenched, and tempered.
- Made to precise specifications.
- Convenient travel pouch.
More Details - C.S. Osborne & Co. Arch Punch, 3/8 (OSB14938)
- Inside taper permits the punchings to clear easily through the barrel.
- Punches have fully polished barrel and black enamel handle.
- Additional sizes available upon request.
More Details - C.S. Osborne & Co. Arch Punch, 1 (OSB1491)
- Inside taper permits the punchings to clear easily through the barrel.
- Punches have fully polished barrel and black enamel handle.
- Additional sizes available upon request.
More Details - C.S. Osborne & Co. Arch Punch, 1/2 (OSB14912)
- Inside taper permits the punchings to clear easily through the barrel.
- Punches have fully polished barrel and black enamel handle.
- Additional sizes available upon request.
More Details - C.S. Osborne & Co. Arch Punch, 3/4 (OSB14934)
- Inside taper permits the punchings to clear easily through the barrel.
- Punches have fully polished barrel and black enamel handle.
- Additional sizes available upon request.
More Details - Greenlee 30043 Replacement Draw Stud for Hydraulic Drivers, 3/8, 9.5 (GRX1614SS)
- Made from high-quality materials.
- Durable replacement part.
- Designed to work with hydraulic drivers.
More Details - Starrett 5-Piece Center Punch Set (LST50488)
- Made of specially selected steel, hardened and properly tempered.
- Well proportioned, nicely finished and have a knurled finger grip.
- Points are ground at the proper angle to give maximum service, and the tips are accurately centered.
More Details - Proto Long Aligning Punch (PTO1558)
- Modified parabolic striking end for greater resistance to mushrooming and chipping.
- For lining up holes in flanges, assemblies, and for other mating parts and for removing long pins and shafts.
More Details - Proto Center Punch (PTO4158)
- Modified parabolic striking end for greater resistance to mushrooming and chipping.
- For metal working layout such as marking intersecting lines, hole locations, and pilot drill starting points.
More Details - Proto Center Punch (PTO4138)
- Modified parabolic striking end for greater resistance to mushrooming and chipping.
- For metal working layout such as marking intersecting lines, hole locations, and pilot drill starting points.
More Details - Proto Center Punch (PTO4112)
- Modified parabolic striking end for greater resistance to mushrooming and chipping.
- For metal working layout such as marking intersecting lines, hole locations, and pilot drill starting points.
More Details - Proto Punch Pin, 3/16 (PTO4738X316)
- Modified parabolic striking end.
- Two-piece design.
- Heat-treated for strength and durability.
More Details - Proto Punch Pin, 3/32 (PTO4714X332)
- Modified parabolic striking end.
- Two-piece design.
- Heat-treated for strength and durability.
More Details - Proto Punch Pin, 1/16 (PTO4714X116)
- Modified parabolic striking end.
- Two-piece design.
- Heat-treated for strength and durability.
More Details - Proto Punch Pin, 1/8 (PTO47516X18)
- Modified parabolic striking end.
- Two-piece design.
- Heat-treated for strength and durability.
More Details - Starrett Drive Pin Punch, 4, 1/16 (LST52578)
- Specially selected tool steel is hardened and tempered to the proper hardness.
- Knurled finger grips for ease of handling.
- A special tempering process makes the head less likely to fracture from a hard, off-center blow.
More Details - Starrett Drive Pin Punch, 4, 1/8 (LST52580)
- Specially selected tool steel is hardened and tempered to the proper hardness.
- Knurled finger grips for ease of handling.
- A special tempering process makes the head less likely to fracture from a hard, off-center blow.
More Details - Starrett Automatic Center Punch, 5, 9/16 Diameter (LST50120)
- Tension of regulating spring is constant, so marks made by point are uniform in depth and size for each setting.
- Easily removable point.
- No hammer required, mechanism automatically strikes a blow when downward pressure is applied.
- Adjustable knurled cap regulates force of blow.
- Specially selected tool steel is hardened and tempered to the proper hardness.
- Knurled finger grips for ease of handling.
- A special tempering process makes the head less likely to fracture from a hard, off-center blow.
More Details - Proto 7-Piece Drift Punch Set, 3/32 to 3/8, Alloy Steel (PTO96A)
- Tooled to precise specifications.
- Hardened, tempered alloy steel.
More Details - Proto 7-Piece Roll Pin Punch Set, 1/16 to 1/4, Alloy Steel (PTO49007)
- Tooled to precise specifications.
- Hardened, tempered alloy steel.
More Details - Proto 7-Piece Punch Pin Set (PTO47A)
- Two-piece design for greater durability.
- Straight tip prevents binding.
- Mushroom- and chip-resistant.
- Polished identification panel.
- Black oxide finish.
More Details